Search This Blog

Thursday, 5 April 2012

                       HOW RADIO WAVES ARE PRODUCED


Introduction: Light Waves and the Electromagnetic Spectrum

Light consists of electromagnetic (EM) waves. An EM wave is composed of an electric field and a magnetic field that are oscillating together. The fields are oriented perpendicular to each other, and the wave travels in a direction perpendicular to both of the fields (see image at right). These waves can also be thought of as particles called photons: massless packets of energy that travel at the speed of light. In fact, EM radiation behaves as both a particle and a wave at the same time. EM waves can be characterized by any of three properties: wavelength (λ) - the distance between two adjacent crests of the wave, frequency (f) - the number of wave oscillations per second, or the energy (E) of the individual photons in the wave. For all types of EM radiation, the simple relationships between wavelength, frequency, and energy are:
where wavelength is measured in units of length such as meters (where 1 cm = 10-2 meters, 1 micrometer = 10-6 meters, etc.), frequency is measured in units of Hertz (Hz), where 1 Hz = 1 wave crest per second (e.g. 1 MHz = 106 Hz, 1 GHz = 109 Hz); c is the speed of light, which is about 3 x 108 meters per second (or 186,000 miles per second); and h is Planck's constant, which is equal to 6.63 x 10-27 erg/s, where an erg is a unit of energy. Remarkably, all forms of EM radiation (visible light, x-rays, radio waves, etc.) travel at the speed of light, regardless of their energy. Since the energy of an EM wave is directly proportional to its frequency and inversely proportional to its wavelength, the higher the energy of the wave, the higher the frequency, and the shorter the wavelength.
The different wavelengths of EM radiation cause the radiation to react differently with different materials, such as our eyes or detectors in telescopes. The way visible light of different wavelengths interacts with our eyes gives rise to "colors", with the shorter wavelengths (about 0.0004 mm) appearing as blue light and the longer wavelengths (about 0.0007 mm) appearing as red light. Even shorter wavelengths of EM radiation (such as x-rays) can pass right through tissues in our bodies. Radiation at longer wavelengths (e.g. infrared) cannot be seen by our eyes, but can be felt as heat. Radio waves are EM waves with the longest wavelengths, from 1 mm - 100 km. The image below shows the entire electromagnetic spectrum, from shorter wavelengths to longer wavelengths.
em1
wave1
Short wavelength
High frequency
High energy
em2wave2
Long wavelength
Low frequency
Low energy

Just as the EM spectrum is divided up into different regions depending on wavelength, the radio region of the EM spectrum can also be divided up into different regions or "bands". These are the bands in which astronomers use radio telescopes to observe the radio waves emitted by astronomical objects. The most common radio band names and their corresponding wavelengths/frequencies are:
BandWavelengthFrequency
P-band90 cm327 MHz
L-band20 cm1.4 GHz
C-band6.0 cm5.0 GHz
X-band3.6 cm8.5 GHz
U-band2.0 cm15 GHz
K-band1.3 cm23 GHz
Q-band7 mm45 GHz
Astronomers must build special telescopes and detectors in order to detect EM radiation of different wavelengths. For example, optical telescopes are designed similar to the human eye, with a lens to focus incoming light onto a detector. Since radio waves have a much longer wavelength than optical light, radio telescopes are designed much differently, although the basic principles are the same. Learn more about how radio telescopes work.
Electromagnetic radiation is emitted by charged particles such as electrons when they change speed or direction (or accelerate). In the following sections we will see how this basic concept applies to the primary astrophysical processes that emit radiation at radio wavelengths.
In general, electromagnetic radiation is emitted by one of two means, eitherthermal or non-thermal mechanisms. Thermal emission, which depends only on the temperature of the emitting object, includes blackbody radiation,free-free emission in an ionized gas, and spectral line emission. Non-thermal emission, which does not depend on the temperature of the emitting object, includes synchrotron radiation, gyrosynchrotron emission, and amplified emission from masers in space.

Thermal Emission

Blackbody Radiation

Thermal emission is perhaps the most basic form of emission for EM radiation. Any object or particle that has a temperature above absolute zero emits thermal radiation. The temperature of the object causes the atoms and molecules within the object to move around. For example, the molecules of a gas, as in a planet's atmosphere, spin around and bump into one another. When the molecules bump into each other, they change direction. A change in direction is equivalent to acceleration. As stated above, when charged particles accelerate, they emit electromagnetic radiation. So each time a molecule changes direction, it emits radiation across the spectrum, just not equally. As a result, the amount of motion within an object is directly related to its temperature.
bb
You can explore this for yourself by placing a cast-iron pan on a stove, heating it for a few minutes, and then placing it to the side. It is hot enough to be emitting a noticeable amount of infrared radiation (or heat), which you can detect by placing your hands near it. If you were to put more heat into the iron, it would eventually emit higher and higher energy wavelengths, until it would glow on its own, emitting visible light as well as infrared radiation.
Scientists call this blackbody radiation. A blackbody is a hypothetical object that completely absorbs all of the radiation that hits it, and reflects nothing. The object reaches an equilibrium temperature and re-radiates energy in a characteristic pattern (or spectrum). The spectrum peaks at a wavelength that depends only on the object's temperature. All objects in the universe behave this way. The image at left shows blackbody spectra for objects at three different temperatures: 5000 K, 4000 K, and 3000 K. It is apparent from the image that objects at lower temperatures emit more radiation at longer wavelengths. The objects in the image emit at or near the visible range of the electromagnetic spectrum; in order for an object to emit thermal radiation at radio wavelengths, it must be much colder than these objects.
The unit of temperature that astronomers typically use is called the Kelvin, and its symbol is K (no degree symbol is used). To convert from degrees Celsius to Kelvin, add 273 to the temperature in Celsius. So, if an object has a temperature of 100° C, its temperature in Kelvin is 100+273 = 373 K. Objects that are cooler than about 1000 K emit more infrared than visible light, such as the Earth orbrown dwarfs (dim, cool objects too massive to be planets but not massive enough to be stars). Hotter objects, like stars, emit mostly optical light. Very hot objects emit mostly ultraviolet radiation, such as white dwarfs (dying stars that have burned up all of the hydrogen in their cores). The major difference in the type of energy emitted by these objects is their temperature.
3k
The Sun and other stars are, for all intents and purposes, considered blackbody radiators. By looking at the frequency or "color" of the radiation they emit, scientists can learn about the temperature of these bodies. For example, cooler stars appear red and hotter stars appear bluish-white.
One of the most famous examples of a "perfect" blackbody is known as the Cosmic Microwave Background (CMB) radiation. This is the radiation permeating the entire Universe that was released during the Big Bang explosion and has been cooling for the last 15 billion years. Today the CMB radiation is so cold (only 2.725 K, or -270° C), that most of the radiation is emitted at radio wavelengths of a few centimeters (also called "microwave" radiation; see image at right). Astronomers were able to obtain the spectrum of the microwave background using a specially designed satellite called the Cosmic Background Explorer (COBE). The blackbody nature of the microwave background spectrum matches the predictions of the Big Bang theory extremely accurately, thus confirming the theory that the microwave background radiation was created in the Big Bang explosion. The Wilkinson Microwave Anisotropy Probe (WMAP), launched in 2001, has observed the microwave background to an even higher level of sensitivity, giving astronomers greater insights into the origin and evolution of the Universe.

Free-Free Emission

Another form of thermal emission comes from gas which has been ionized. Atoms in the gas become ionized when their electrons become stripped or dislodged. This results in charged particles moving around in an ionized gas or "plasma", which is a fourth state of matter, after solid, liquid, and gas. As this happens, the electrons are accelerated by the charged particles, and the gas cloud emits radiation continuously. This type of radiation is called "free-free" emission or "bremsstrahlung". The image at left shows the emission of a photon when a negatively charged electron (green particle) changes direction or accelerates due to the presence of a nearby positively charged ion (red particle). Some sources of free-free emission in the radio region of the EM spectrum include ionized gas near star-forming regions or Active Galactic Nuclei (AGN).

Spectral Line Emission

Spectral line emission involves the transition of electrons in atoms from a higher energy level to lower energy level. When this happens, a photon is emitted with the same energy as the energy difference between the two levels. The emission of this photon at a certain discrete energy shows up as a discrete "line" or wavelength in the electromagnetic spectrum.
An important spectral line that radio astronomers study is the 21-cm line of neutral hydrogen. This line is emitted by the following transition: the hydrogen atom consists of one electron orbiting one proton in the nucleus. Both the electron and the proton have a "spin". In the lowest energy state, or "ground" state, the spins of both particles are in opposite directions. When the atom becomes excited, either by absorbing a photon of energy, or by bumping into other atoms, the electron absorbs a small amount of energy, and the spin of the electron "flips," so that the spins of both particles are in the same direction. When the atom reverts back to its natural state, it loses this energy by emitting a photon with a wavelength of 21 cm, in the radio region of the electromagnetic spectrum.

Non-thermal Emission

Synchrotron Emission

Non-thermal emission does not have the characteristic signature curve of blackbody radiation. In fact, it is quite the opposite, with emission increasing at longer wavelengths.The most common form of non-thermal emission found in astrophysics is called synchrotron emission. Basically, synchrotron emission arises by the acceleration of charged particles within a magnetic field. Most commonly, the charged particles are electrons. Compared to protons, electrons have relatively little mass and are easier to accelerate and can therefore more easily respond to magnetic fields.
As the energetic electrons encounter a magnetic field, they spiral around it rather than move across it. Since the spiral is continuously changing the direction of the electron, it is in effect accelerating, and emitting radiation. The frequency of the emission is directly related to how fast the electron is traveling. This can be related to the initial velocity of the electron, or it can be due to the strength of the magnetic field. A stronger field creates a tighter spiral and therefore greater acceleration.
For this emission to be strong enough to have any astronomical value, the electrons must be traveling at nearly the speed of light when they encounter a magnetic field; these are known as "relativistic" electrons. (Lower-speed interactions do happen, and are called cyclotron emission, but they are of considerably lower power, and are virtually non-detectable astronomically).
As the electron travels around the magnetic field, it gives up energy as it emits photons. The longer it is in the magnetic field, the more energy it loses. As a result, the electron makes a wider spiral around the magnetic field, and emits EM radiation at a longer wavelength. To maintain synchrotron radiation, a continual supply of relativistic electrons is necessary. Typically, these are supplied by very powerful energy sources such as supernova remnants, quasars, or other forms of active galactic nuclei (AGN).
It is important to note that, unlike thermal emission, synchrotron emission is polarized. As the emitting electron is viewed side-on in its spiral motion, it appears to move back-and-forth in straight lines. Its synchrotron emission has its waves aligned in more or less the same plane. At visible wavelengths this phenomenon can be viewed with polarized lenses (as in certain sunglasses, and in modern 3-D movie systems).

Masers

Another form of non-thermal emission comes from masers. A maser, which stands for "microwave amplification by stimulated emission of radiation", is similar to a laser (which amplifies radiation at or near visible wavelengths). Masers are usually associated with molecules, and in space masers occur naturally in molecular clouds and in the envelopes of old stars. Maser action amplifies otherwise faint emission lines at a specific frequency. In some cases the luminosity from a given source in a single maser line can equal the entire energy output of the Sun from its whole spectrum.
Masers require that a group of molecules be pumped to an energized state (labeled E2 in the diagram at right), like compressed springs ready to uncoil. When the energized molecules are exposed to a small amount of radiation at just the right frequency, they uncoil, dropping to a lower energy level (labeled E1 in the diagram), and emit a radio photon. The process entices other nearby molecules to do the same, and an avalanche of emission ensues, resulting in the bright, monochromatic maser line. Masers rely on an external energy source, such as a nearby, hot star, to pump the molecules back into their excited state (E2), and then the whole process starts again.
The first masers to be discovered came from the hydroxl radical (OH), silicon oxide (SiO), and water (H2O). Other masers have been discovered from molecules such as methanol (CH3OH), ammonia (NH3), and formaldehyde (H2CO).

PICTURES:




VIDEOS:







Tuesday, 3 April 2012

CRT

                                     CATHODE RAY TUBE

Like most scientists of that era, he inspired generations of later physicists, from Einstein to Hawking.
His better-known research proved the existence of negatively charged particles, later called electrons, and earned him a deserved Nobel Prize for physics. This research led to further experiments by Bohr and Rutherford, leading to an understanding of the structure of the atom.

WHAT IS A CATHODE RAY TUBE


        Look at any glowing neon sign or any ‘old-fashioned’ television set, and you are looking at the modern descendants of the cathode ray tube.Even without consciously realizing it, most of us are already aware of what a cathode ray tube is.
Physicists in the 19th century found out that if they constructed a glass tube with wires inserted in both ends, and pumped out as much of the air as they could, an electric charge passed across the tube from the wires would create a fluorescent glow. This cathode ray also became known as an ‘electron gun’.
Later and improved cathode ray experiments found that certain types of glass produced a fluorescent glow at the positive end of the tube. William Crookes discovered that a tube coated in a fluorescing material at the positive end, would produce a focused ‘dot’ when rays from the electron gun hit it.
With more experimentation, researchers found that the ‘cathode rays’ emitted from the cathode could not move around solid objects and so traveled in straight lines, a property of waves. However, other researchers, notably Crookes, argued that the focused nature of the beam meant that they had to be particles.
Physicists knew that the ray carried a negative charge but were not sure whether the charge could be separated from the ray. They debated whether the rays were waves or particles, as they seemed to exhibit some of the properties of both. In response, J. J. Thomson constructed some elegant experiments to find a definitive and comprehensive answer about the nature of cathode rays.

THOMSON’S FIRST CATHODE RAY EXPERIMENT

Thomson had an inkling that the ‘rays’ emitted from the electron gun were inseparable from the latent charge, and decided to try and prove this by using a magnetic field.
His first experiment was to build a cathode ray tube with a metal cylinder on the end. This cylinder had two slits in it, leading to electrometers, which could measure small electric charges.
He found that by applying a magnetic field across the tube, there was no activity recorded by the electrometers and so the charge had been bent away by the magnet. This proved that the negative charge and the ray were inseparable and intertwined.

THOMSON’S CATHODE RAY SECOND EXPERIMENT

Like all great scientists, he did not stop there, and developed the second stage of the experiment, to prove that the rays carried a negative charge. To prove this hypothesis, he attempted to deflect them with an electric field.
Earlier experiments had failed to back this up, but Thomson thought that the vacuum in the tube was not good enough, and found ways to improve greatly the quality.
For this, he constructed a slightly different cathode ray tube, with a fluorescent coating at one end and a near perfect vacuum. Halfway down the tube were two electric plates, producing a positive anode and a negative cathode, which he hoped would deflect the rays.
As he expected, the rays were deflected by the electric charge, proving beyond doubt that the rays were made up of charged particles carrying a negative charge. This result was a major discovery in itself, but Thomson resolved to understand more about the nature of these particles.

THOMSON’S THIRD EXPERIMENT

The third experiment was a brilliant piece of scientific deduction and shows how a series of experiments can gradually uncover truths.
Many great scientific discoveries involve performing a series of interconnected experiments, gradually accumulating data and proving a hypothesis.
He decided to try to work out the nature of the particles. They were too small to have their mass or charge calculated directly, but he attempted to deduce this from how much the particles were bent by electrical currents, of varying strengths.
Thomson found out that the charge to mass ratio was so large that the particles either carried a huge charge, or were a thousand times smaller than a hydrogen ion. He decided upon the latter and came up with the idea that the cathode rays were made of particles that emanated from within the atoms themselves, a very bold and innovative idea.

LATER DEVELOPMENTS

Thomson came up with the initial idea for the structure of the atom, postulating that it consisted of these negatively charged particles swimming in a sea of positive charge. His pupil, Rutherford, developed the idea and came up with the theory that the atom consisted of a positively charged nucleus surrounded by orbiting tiny negative particles, which he called electrons.
Quantum physics has shown things to be a little more complex than this but all quantum physicists owe their legacy to Thomson. Although atoms were known about, as apparently indivisible elementary particles, he was the first to postulate that they had a complicated internal structure.
Thomson’s greatest gift to physics was not his experiments, but the next generation of great scientists who studied under him, including Rutherford, Oppenheimer and Aston. These great minds were inspired by him, marking him out as one of the grandfathers of modern physics.




WORKING OF CRT



How the Cathode Ray Tube Works:

  • A CRT is composed of several parts, all working together to for a coherent picture. A CRT contains a cathode, or a negative electronic terminal. It consists of a thick, heated wire that is contained within a glass tube. This tube is vacuum-sealed to eliminate resistance. The cathode emits a stream of electrons into the tube, which travel down its length and are attracted and accelerated by an anode, a positive terminal. After the electrons are sped up to extremely high speed, they strike a phosphorescent screen at the end of the tube, causing it to glow. However, it's important to note that, in addition to these parts, CRTs also require steering coils. These coils consist mainly of copper wire wrapped around the picture tube itself, and create magnetic fields that steer the electron beam to the desired pixel on the screen. These magnetic fields can be manipulated with extreme precision by changing the voltage of the wiring to focus the electron beam to any point on the screen.
    Color television screens use three electron beams at once. They use one each for red, blue and green. These three colors are used in the phosphor coating on of the picture tube. When each color is struck by its respective electron beam, it glows, creating a color picture. In black and white picture sets, there is a single phospor, which glows white when struck by the beam of electron radiation emitted from the picture tube. The human eye has been trained into assembling these small dots into a cohesive picture. Obviously, the more "dots per inch" the higher the "resolution", and the clearer the picture. The highest quality pictures may consist of hundreds of thousands of "dots per inch" creating an extremely clear picture.

The Future of CRT Televisions

  • While CRTs certainly dominate the market now, what may happen in the future is a completely different story. Plasma televisions, once prohibitively expensive, have dropped considerably in price since their introduction. The newest possible CRT replacement are LCD televisions. They are providing a serious challenge to older CRT televisions. The advent of High Definition Television, or HDTV, has given the LCD and Plasma screens a growing sector of the market. CRT screens are limited as to the precision of the picture quality they offer, and as broadcast picture quality improves over time, CRTs may not be able to translate that picture quality onto the screen.

     PICTURES:





The Braun Tube
This is one of five CRT oscilloscopes developed by Ferdinand Braun in 1897. Using a bellows, it took a strong man to evacuate the air. The successor to Sir William Crookes' vacuum tubes some 20 years earlier, these tubes used "cold" cathodes, which means they were unheated, but required a huge voltage. (Image courtesy of O'Neill's Electronic Museum)







Flat Panel Vs. CRT
The L66 was Eizo's first 18" desktop LCD display. Sitting next to its CRT counterpart, the flat panel not only took up less space, but used less energy and emitted less radiation. It was also glare proof. Formerly selling in the U.S. under the Nanao brand, Eizo is known for its high-quality monitors. (Image courtesy of EIZO Nanao Technologies Inc.)







CRT Front Projection
The first data and TV projectors used CRTs, and although mostly abandoned, they continue to provide the highest quality. In 2000, this home theater was built by a serious video enthusiast. (Images courtesy of Kal of CurtPalm.com)







CRT Rear Projection
Although big and bulky, the Pioneer Elite Pro-107 was perhaps the best CRT-based rear-projection TV ever made. Still working fine after 17 years, this unit was sold for a pittance in 2010. See rear-projection TV.